Information
Tired of using specific hardware on your 4040 and 4080 T-Slot channels and aluminium profile?
XTrakNut (Hex Track Nut) is here to the rescue. Xtraknut M8 Hex Bolt and Nut Adapter for 40 Series 4040 4080 T-Slot Extrusion Aluminium Profile Track Channel.
Hex Bolts have a hexagon head, part thread and part shank and is used to fasten material together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole. A nut and bolt combination compresses everything together.
To tighten the nut requires a socket and wrench or a spanner, If, while tightening the nut, the bolt turns with it, a second spanner or wrench is required to hold-on to the bolt while the nut is tightened.
But how can you do that inside an track or channel? Well, with Xtraknut the botl/nut will stop spinning allowing you to use a wider variety of more common hardware to plan your set-up.
✅ Manufactured through an auto-part metal stamping mold
✅ Great strength and durability
✅ Engineered and carefully designed for M8 Bolts/Nuts
✅ Body laser cut and stamped from 3mm high quality aluminium
✅ Quick and easy installation / removal
✅ Fits on a variety of profiles like 4040 and 4080 V-Slot and T-Slot channels
✅ Allows you to use a range of bolt lenghts wich is a common and cheaper hardware than specific v-slot hardware
Working great with this hardware...
✅ M8 x 1.25p Hex Bolts Class 8.8 High Tensile AS 1110.1
✅ M8 x 1.25p Hex Nyloc Nuts High Tensile DIN 985
✅ M8 x 1.25p Stainless A2-35 G304 Hex Thin Lock Nuts DIN 439
✅ M8 x 16-20mm Stainless A2-70 G304 Flat Washers HEC Standard
